Halto gripper

Halto is a picture fastener to be screwed onto the frame – for example as a replacement for D-ring hangers – and includes an automatic height-holding system. This mechanism is called ‘Gripper’, and allows the artwork to remain in position on a vertical cable. Unlike traditional cable clips, grippers do not cut cables, but rather work by applying progressive 3 or 6 microbead pressure.

Based on our experience in designing cable hangers, Halto combines all the benefits of the Gripsys range into a single model covering 75% of cable hanging needs.
The Halto gripper, which is produced in large volumes, is very affordable for its quality.

• 2 off-centre holes for fixing ⌀ 3 mm wood screws (supplied).
• Height adjustment with automatic blocking, no tools needed.
• Smooth cable locking ring.
• Non-reflective natural brass look.
• Anti-stain thanks to passivation.
• Can be used with 7 × 7 “aircraft” type galvanised or stainless-steel cables, of ⌀ 1 mm to 1.8 mm.
• Anti-theft security via crimped ending ferrule on the cable.