19,00€ / piece
Cable suspender to use of cables by the meter of ⌀ 1 mm to 1.8 mm on Planex and Pro-30 rails.
This suspender kit is suitable for all types of rails: straight or sloped walls or ceilings. It can also be used in Floor-ceiling wire tensioning.
It is made up of an inverted cable holder and a nut with a screw. The cable holder is articulated, so it can be used with any type of layout. The nut works as the slide; it can be inserted at any point on the rail from the front and is held in place thanks to a spring. The cable can be fed into the gripper in which it is automatically stuck without tools. Remove the cable by disengaging the gripper (nuts for rails that are not in stock can be made or supplied).
For 7 × 7 cables by the metre.
The indicated loads are to be reduced according to the Ø, cable material and type of rail used. Please contact us.
Shipped within: 1-2 weeks
| Quantity : 20 – 99 | 5% |
| Quantity : 100-199 | 10% |
| Quantity : 200+ | 15% |
The weights indicated are based on tests carried out by Chassitech on a traction bench in near-real life conditions. They include a large safety margin but these are for indicative purposes. The load resistance depends very much on how the fastenings are fixed on the object and in the wall”.
| Material | |
|---|---|
| Max. recommended load |
 Technical support |  Fast production |  Delivery 24/48h |  Innovations |  Secure payment |
