Self gripping cable suspender for wall rails – for ø 1 mm to 1.8 mm cables

17,10 / piece

Upper fastener allowing the use of cables by the meter on Planex and Pro-30 wall rails.
This suspender kit is made up of an inverted gripper and a nut with a screw.
The nut can be inserted at any point on the rail from the front. It works as a slide, tightening the screw blocks it in its place.

Nuts can also be made for non-listed rails.

For cables by the metre like 7 × 7 and ø 1 mm to 1.8 mm (also exists for ø 1.5 mm to 2.5 mm cables).
Max load: 25 kg to be reduced according to ø, cable material and type of rail used. Please contact us.

Shipped within: 1-2 weeks

Quantity : 20 – 99 5%
Quantity : 100-199 10%
Quantity : 200+ 15%

Description

The weights indicated are based on tests carried out by Chassitech on a traction bench in near-real life conditions. They include a large safety margin but these are for indicative purposes. The load resistance depends very much on how the fastenings are fixed on the object and in the wall”.

Additional information

Gripper dimensions

25 × 9 × 9 mm

hole ø for fixing screws

3,2 mm

Material



You may also like…